|
|
||
| Throughput Capacity | 3 t/hr | |
| Operating Temperature | Waste in auger chamber: 205-212ºF (96-100ºC) Steam in auger chamber jacket: 220-240ºF (104-115ºC) |
|
| Construction Material | Painted steel (optional stainless steel) | |
| Dumper | Hydraulic | |
| Available Configuration | Floor or dock mounted door | |
| Safety |
|
|
| Electrical Enclosure | NEMA 4 cabinets with Siemens PLC and touchscreen | |
| HEPA Filter | Min. operational efficiency of 99.97@0.3 microns | |
| Time in Auger Chamber | ≥ 60 minutes | |
| Maximum Cart Size | 220 gallons (800 liters) x 2 carts/lift | |
| Recommended Uilities | Sewer: 4″ flush trapped floor drain to accept 4″ ID connection Ventilation: 4″ to outside above roof (steam) (piping by others) 8″ to outside above roof (HEPA) (piping by others) Room Make-Up Air: 4000 CFM (delivered during equipment operation) Steam: 2000 lb/hr regulated to 13-14 psig max. and 1.5″ minimum diameter pressure relief valve set @ 15 psig max. (pressure regulator and pressure relief valve supplied by others) Electric: Shredder: 480 VAC, 3 phase plus ground, 60 Hz, 500 amp service Communications: Ethernet cat5 preferred or standard 4 wire analog with call access. (All utilities within 10 feet of unit) |
|
| Options |
|
|
